Everbuild Building Products Ltd is the UK and Ireland's largest independent manufacturer of sealants, adhesives, fillers and building chemicals.
EVERBULD PINKGRIP DRY FIX is a revolutionary new type of fast curing adhesive foam that has been specially developed for the rapid installation of Plasterboard, Insulation Boards and other such materials such as Roof Decking and Floorboards. Supplied in a pressurised canister Pinkgrip Dry Fix is applied with an applicator gun that has been specially manufactured to offer optimum adhesive extrusion rate and compatibility with the special “safety” type of valve used on the canister.
Note: Pinkgrip Dry Fix must only be applied using the Pinkgrip Dry Fix Applicator Gun, ordinary Foam Guns must not be used.
BENEFITS
Pinkgrip Dry Fix provides significant time, labour and convenience benefits when compared to traditional dry wall adhesives, a summary as follows:
Quick
. 30% time saving over conventional dry wall adhesives.
. Board only needs holding for 1 minute
. Can be plastered in ONE HOUR
. Canister can be left on gun for immediate re-use
Clean
. No mixing
. No mess
. No water
. No bucket
. No dust
Clever
. No heavy bags to carry
. Once can fixes 5 standard boards
. Can be applied to board or wall
. Works on solid walls, metal and timber studding
. Timed delay prevents post expansion once in position
. Helps to reduce cold bridging
. No nails or screws. No filling over or popping out.
AREAS FOR USE
. For fixing Plasterboard to solid walls
. For fixing Plasterboard to metal and timber stud walls and battens
. Bonding insulation boards to most substrates
. Fixing Roof Decking and Floorboards to beams
. Bonds to: Masonry, Concrete, Plaster , Timber, Metal, Insulation boards, polystyrene, Polyurethane, Bitumen, Asphalt and much more.
LIMITATIONS
. Only use as directed
. Only use on applications suggested, although Pinkgrip Dry Fix may be suitable for many building applications the user needs to carry out their own trials to determine suitability and these are undertaken entirely at the users risk.
. Ensure surrounding surfaces that need protecting are covered with dust sheets or Everbuild Roll and Stroll Protector film.
. Remove wet adhesive / foam spillages immediately with Dual Purpose Foam Cleaner (not on carpets) or Everbuild Wonder Wipes.
APPLICATIONS
Carefully read text in health and safety section before use. The application procedure for bonding plasterboard can be summarised in three simple steps:
1. Apply adhesive to board or wall using the Pinkgrip Dry Fix Applicator Gun and leave to stand for 4-5 minutes.
2. Lever the board up and press to wall, applying pressure across the whole surface of the board. Hold in place for one minute.
3. Wait one hour - then plaster!
Before using Pinkgrip Dry Fix please also read the following detailing application procedure as Pinkgrip Dry Fix is a new type of adhesive and like most building products there's a Knack to it:
back to the top Building Products
Pinkgrip Dry Fix
EVERBULD PINKGRIP DRY FIX is a revolutionary new type of fast curing adhesive foam that has been specially developed for the rapid installation of Plasterboard, Insulation Boards and other such materials such as Roof Decking and Floorboards. Supplied in a pressurised canister Pinkgrip Dry Fix is applied with an applicator gun that has been specially manufactured to offer optimum adhesive extrusion rate and compatibility with the special “safety” type of valve used on the canister.Note: Pinkgrip Dry Fix must only be applied using the Pinkgrip Dry Fix Applicator Gun, ordinary Foam Guns must not be used.
BENEFITS
Pinkgrip Dry Fix provides significant time, labour and convenience benefits when compared to traditional dry wall adhesives, a summary as follows:
Quick
. 30% time saving over conventional dry wall adhesives.
. Board only needs holding for 1 minute
. Can be plastered in ONE HOUR
. Canister can be left on gun for immediate re-use
Clean
. No mixing
. No mess
. No water
. No bucket
. No dust
Clever
. No heavy bags to carry
. Once can fixes 5 standard boards
. Can be applied to board or wall
. Works on solid walls, metal and timber studding
. Timed delay prevents post expansion once in position
. Helps to reduce cold bridging
. No nails or screws. No filling over or popping out.
AREAS FOR USE
. For fixing Plasterboard to solid walls
. For fixing Plasterboard to metal and timber stud walls and battens
. Bonding insulation boards to most substrates
. Fixing Roof Decking and Floorboards to beams
. Bonds to: Masonry, Concrete, Plaster , Timber, Metal, Insulation boards, polystyrene, Polyurethane, Bitumen, Asphalt and much more.
LIMITATIONS
. Only use as directed
. Only use on applications suggested, although Pinkgrip Dry Fix may be suitable for many building applications the user needs to carry out their own trials to determine suitability and these are undertaken entirely at the users risk.
. Ensure surrounding surfaces that need protecting are covered with dust sheets or Everbuild Roll and Stroll Protector film.
. Remove wet adhesive / foam spillages immediately with Dual Purpose Foam Cleaner (not on carpets) or Everbuild Wonder Wipes.
APPLICATIONS
Carefully read text in health and safety section before use. The application procedure for bonding plasterboard can be summarised in three simple steps:
1. Apply adhesive to board or wall using the Pinkgrip Dry Fix Applicator Gun and leave to stand for 4-5 minutes.
2. Lever the board up and press to wall, applying pressure across the whole surface of the board. Hold in place for one minute.
3. Wait one hour - then plaster!
Before using Pinkgrip Dry Fix please also read the following detailing application procedure as Pinkgrip Dry Fix is a new type of adhesive and like most building products there's a Knack to it: